GameCube Fan Mod

This mod uses a custom 3d printed fan mount for the GameCube, which allows you to install a standard 50mm x 10mm PC fan. 

The mod was created with the intention to use a quieter fan than the original system fan, but it also provides a means to replace failing parts in a system that is almost twenty years old.

It was requested by Newschool2k17 and inspired by his mod https://assemblergames.com/threads/gamecube-silent-fan-mod.67463/ 

The suggested fan is a Noiseblocker XS-1, but any 50mm x 10mm 12vdc fan will be compatible. 

The noise blocker fan can be found on Amazon or likely any pc parts re-seller.

In addition to the fan it may be helpful to get a compatible connector to interface with the original port. These can be found at digikey with the following part numbers/links, if you want to cut the wire off of your old fan that will also work.

455-1165-ND - https://www.digikey.com/product-detail/en/PHR-2/455-1165-ND/608607
455-3082-ND - https://www.digikey.com/product-