Gaming keypad

## Small Gaming Keypad

This is a 21 keys gaming keypad, "similar" to the razer orbweaver.
It has 20 MX switches organized with the same layout as the Ergodox/Redox.

Some sanding might necessary depending of your printer (there is a 0.1mm clearance for the base plate).

###Todo :
- Printed keys
- The wrist rest

###B.O.M. :
Should sum up to less than 15€ on your favorite Chinese web-store.
- 1 Arduino pro micro
- 21 MX switches
- 12 M2 10mm self-tapping screws
- 2 M3 15/20mm screws + 2 2M3 nuts (3mm thick)
- 1 usb to micro-usb cable
- Some wires & soldering
- 20 switching diodes (I used 1N4148)

###Build instructions :
- Print everything
- Check that the build plate fits nicely in between the top&bottom parts and sand accordingly
- Screw the thumb part with the M3 nuts/screws
- Put your MX switches on the build plate
- Solder the switch matrix and diodes on the build plate ([tutorial I wish I found earlier](https://deskthority.net/workshop-f7/brownfox-