Thingiverse
Gaming PC microATX using 255x250 bed
di tabahi
1
Download
2
Likes
0
Makes
microATX gaming PC
Printed using Anycubic Kobra (250x250)
It has 2 variations:
1- Default model files are for generic ATX power supply.
2- Model B is what's shown in pictures, it uses a server PSU, which would require soldering. This model is in ZIP to avoid confusion.
Dimensions:
- Total print area is 250x255. On Anycubic Kobra, remove border clearance to use full 255x255 bed. For some microATX boards, it's possible to print within 250mm but MSI boards are usually 246mm which can't be filtted within 250mm.
- Graphics card clearance; 300mm length, 38mm width (double slot), 140mm height
- The acrylic plate is A6 dimensions (105 x 148 mm), 2 to 3 mm.
- Fan in front is standard 120mm fan.
- Fan in the belly is 70mm fan.
- All screws and nuts are M3, mostly 10mm. The front fan + grill screws have to be over 32mm to hold a 25mm thick fan.
Dragon eyes:
Dragon eyes can fit LEDs. I have connected the LED's to fan's voltage line which makes them light up with temperature. You will need a
Printed using Anycubic Kobra (250x250)
It has 2 variations:
1- Default model files are for generic ATX power supply.
2- Model B is what's shown in pictures, it uses a server PSU, which would require soldering. This model is in ZIP to avoid confusion.
Dimensions:
- Total print area is 250x255. On Anycubic Kobra, remove border clearance to use full 255x255 bed. For some microATX boards, it's possible to print within 250mm but MSI boards are usually 246mm which can't be filtted within 250mm.
- Graphics card clearance; 300mm length, 38mm width (double slot), 140mm height
- The acrylic plate is A6 dimensions (105 x 148 mm), 2 to 3 mm.
- Fan in front is standard 120mm fan.
- Fan in the belly is 70mm fan.
- All screws and nuts are M3, mostly 10mm. The front fan + grill screws have to be over 32mm to hold a 25mm thick fan.
Dragon eyes:
Dragon eyes can fit LEDs. I have connected the LED's to fan's voltage line which makes them light up with temperature. You will need a
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
