Gap Wedge Gauge - Two Sizes

This is an easy to use tool to measure the thickness of a gap. Wether this is a gap in a door frame, the height of something elevated off a surface, or any other gap or slot you need to measure. It is very easy to use to get a precise measurement and has printed markings with a precision of 0.2mm on the measured height/thickness. You just slide the tool into the gap and the printed scale will show you the thickness. There are two sizes available, one with a maximum thickness of 10mm, this ones is about 75mm long. And one with a maximum thickness of 20mm which is about 150mm long. I would recommend using the 0.08mm layer height in the print profiles to get a nice smooth bottom slope surface. You can switch to a higher layer height to improve print speed, however I have found that it doesn't add too much time to use the 0.08mm. The small one will print in under an hour, and the large one in a bit over an hour and a half. The scale will print nicely with a standard 0.4mm nozzle, you do no