Garbage Bags Holder – 3D printable model from MakerWorld

MakerWorld

Organizers

Garbage Bags Holder

by CrazySinith · Organizers

18 Downloads

9 Likes

5 Makes

Go to Model

A Garbage Bag Holder I built to house my room's garbage bags. I bought a 500-bag pack and came to realize it's a lot more than I thought. Connector Nut goes on the left, and CN2 goes on the right while facing the garbage bag slot. I also added some 6mm ISO holes in case you would rather use metal screws (which I ended up doing as my nut snapped in place). The tolerance ranges from .24mm to .4mm depending on areas and how difficult it was to print. I used a .28mm draft printing setting and it took roughly 8 hours.

Category

Organizers

Source

MakerWorld

Published

27.02.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Est. print time

8 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Garbage Bags Holder?

Any FDM printer should handle Garbage Bags Holder just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Garbage Bags Holder?

According to the design notes, Garbage Bags Holder takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Garbage Bags Holder available in?

Garbage Bags Holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Garbage Bags Holder free to download?

Yes, Garbage Bags Holder is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL