Garden hose adapter angled

An angled gardena to ¾ inch pipe thread adapter as it is commonly used in garden hose systems. Could be used for prototyping or alongside my holiday watering system adapter. Print in high quality for a good thread, will still need a bit of force on the first screw action. Happy watering :) If your print leaks there might be several reasons: (1) Filament dryness and printing environment. Wet filament and temperature changes lead to shrinkages or enlargements in the final print up so several mm. This is a significant delta which causes the O-Ring not to fit tightly. Solution: dry filament and control printing environment. (2) O-Rings do not fit to printed model. This effect comes from very slight variations in O-Ring manufacturing tolerances and print-tolerances. Original Gardena O-Rings might be 0.5mm smaller than what the model would require to seal the space between adapter, O-Ring and quick-release on the hose itself. Solution: scale up the O-Ring from my models or use the slightly b