Garden Light pole

Hi everybody, This is a garden light I designed with the help of my friend Ivan because alternatives from stores were too expensive for my pockets at the moment. It's very solid and printed in PETG or ASA is gonna be just fine under the elements. I personally printed them in PETG and they have been outside for a while. How to connect the parts: Each part has a bayonet fitting: every piece slides into the other and locks in place with a twist. No glue is required, and it can be easily disassembled if you need to inspect it, replace a part, or change the light bulb and electrical wiring. Size: The height of the column is 45.5 cm (around 18 inches) you can print and mount as many of the middle black parts as you want and each will add around 23cm (around 9 inches). The diameter of the column is 10 cm or around 4 inches (except the base and the cap which are a little larger). Light source: I used an european standard threaded E14 lamp socket, if you are american you can use an E12, it shou