Gardena micro drip adapter

This can print without supports! 4, 6 or 8 outputs
My printer is fairly dialed in and print this without a brim too. The inlet is for a standard G3/4" garden tap. The tap thread outer diameter will measure about 25.5mm. Tap thread is 14 threads per inch.
The hose i use is 4.5 mm to 5mm internal diameter, i used car window washer tubing. The outlet "nipple" is 5.8mm, but i measured about 5.4mm on my final version.

The inspiration for this comes from a design from a thingiverse design by Tom4everblau - great idea Tom! I drew my own design so i could print without supports, and adjust the number of outlets available.

BTW, you will need to regulate the amount of water coming from the tap. We use an additional valve and a Gardena C1030 plus water timer. We have a small herb garden (the eating type) on our terrace, and we try to deliver total 1.5 liter water a couple of times a day during the summer months.