Thingiverse

Gardena wall tool holder

by Boby71

259 Downloads

167 Likes

3 Makes

I was looking for a flexible tool holder for the Gardena combi tool system and did't find anything. So I designed these little gadgets for my tool shed. They will be mounted using two screws (4,5mm or 3/16") in diameter.

I printed mine in ABS at 0,2mm resolution without supports or raft. When you use 30% infill it'll get rock-solid.The print time for my prusa was at approx. 3 hrs per piece.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

ABS

Est. print time

3 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Gardena wall tool holder need supports when printing?

No supports needed for Gardena wall tool holder — it's designed to print clean off the bed.

How long does it take to print Gardena wall tool holder?

According to the design notes, Gardena wall tool holder takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Gardena wall tool holder available in?

Gardena wall tool holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Gardena wall tool holder free to download?

Yes, Gardena wall tool holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Gardena wall tool holder

Add to Collection