Thingiverse

Gas Mask

by TheMissile

154 Downloads

397 Likes

0 Makes

NOW WITH A KEYCHAIN VERSION!

This model is not originally mine. I did, however, edit it to be print- and wearable (removed eye-lenses and the straps. The .blend file is included, in case you guys want to make some changes to the mask.
Credit for original model: Hsieh TingYu on Sketchfab
Link: https://sketchfab.com/3d-models/gas-mask-d562bb4f37bf444ba9034be7fd3c21e7

I made this for a Chaos Insurgency cosplay and I think it works quite well, so this model is for all my Chaos/SCP fans (everyone else is obviously also free to make it).
I hope you guys like it and I'm looking forward to see your makes and variations of it!

There's not much to say about the printing.
It took about 44h to print and I printed it in three pieces, each on the flat side of the cut.
I used 10% infill with organic supports, 0.2mm layer height and a .4mm nozzle on an Ender 3 v2 neo.
I assembled it with superglue (cyanoacrylate based) and soldered it together on the inside.
I also hot-glued some old

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

0.20mm layers

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Layer height

0.2 mm

Est. print time

44 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Gas Mask?

Any FDM printer should handle Gas Mask just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Gas Mask?

According to the design notes, Gas Mask takes approximately 44 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Gas Mask available in?

Gas Mask is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Gas Mask free to download?

Yes, Gas Mask is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Gas Mask

Add to Collection