Gatomon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Overture Matte Purple Transmission Distance: 0.7 PLA PolyLite Lemon Yellow Transmission Distance: 6.5 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Purple At layer #14 (1.2mm) swap to Lemon Yellow At layer #20 (1.68mm) swap to White for the rest.