Thingiverse
Gauge 1 Ivor The Engine
by DrMopp1966
7
Downloads
13
Likes
0
Makes
A Gauge 1 model of Ivor the Engine!
Required to finish:
Motor https://www.digikey.co.uk/en/products/detail/sparkfun-electronics/15277/9995750
Tenmille couplings
Handrails
Marklin bearings (optional)
Two options are available for the chassis, one with enough room in the axle holes for Marklin bearings to be fitted (B) and one without (NB)
There is also the option to either print the axles (with the drive gear and drive axle as one piece) or fit metal axles (for which a separate drive gear is provided)
Model has not been test printed; print at your own risk
Required to finish:
Motor https://www.digikey.co.uk/en/products/detail/sparkfun-electronics/15277/9995750
Tenmille couplings
Handrails
Marklin bearings (optional)
Two options are available for the chassis, one with enough room in the axle holes for Marklin bearings to be fitted (B) and one without (NB)
There is also the option to either print the axles (with the drive gear and drive axle as one piece) or fit metal axles (for which a separate drive gear is provided)
Model has not been test printed; print at your own risk
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!