GDEMU Remote SD Card Mount

Update March 17th 2020
New version with some screw hole placement fixes v1.4

Also the release of the back lit button fit a normal 5mm led into the holder and wire it up.

My remote SD mount consists of three pieces.

GDEMU SD Mount 1.2.stl
GDEMU SD Mount Bracket 1.2.stl
GDEMU SD Mount Button 1.2.stl
GDEMU SD Mount Bracket Clone Height addresses some of the new GDEMU clones that sit lower than the official unit.

In addition to the printed parts you will need some additional parts.

https://www.ebay.com/itm/263799110208
The 15cm one will be more than long enough

https://www.ebay.com/itm/183392137874
M2x8mm (You will need 2 to secure the SD card extension to the mount.)
M3x8mm (You will need 6 of these to assemble the parts)
M3x16mm (you only need one for the front most screw hole)

Everything should print without supports.

Assembly is simple, uses two M3x8mm thread forming screws to attach the GDEMU board to the SD mount bracket.
Screw the SD extension into