Gear 5 Luffy

Project: Gear 5.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.35x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to White At layer #9 (0.8mm) swap to BlackBorder Only Colors from here until the end. At layer #15 (1.28mm) swap to White for the rest.