Gear Fidget Spinner

I designed this Gear Fidget Spinner as I like the way hears mesh together. I was able to eliminate a center bearing and make the center entirely out of plastic. This makes for a pretty quick print overall and a little cheaper per spinner (3 bearings rather than 4). Notice that the "center gear" is floating. There is a rim on the top and bottom of the "center gear" that suspends and centers it using the 3 gears around it. Note that all three bearings must be functional, unlike most spinners. Requires 3 x 608 (22mm) bearings. Please post your makes and comments! *Use my Spinner Press to help insert the bearings. http://www.thingiverse.com/thing:2275122* Print Settings Printer: Hatchbox Alpha Rafts: No Supports: No Resolution: 0.25mm Infill: 20% Notes: Print 3 gears, 1 center gear, 1 cover pin, and 1 cover socket = 1 spinner. Post-Printing ============= Assembly Insert the bearings in each gear Slide the bearings on to the "cover sockets" Fit the center gear betwee