Gear Lamp

With the gear concept I have created this model that works both as a bedside table and as a hanging lamp.

Instead of PLA I've used a PVB filament because it's easier to postprocess. Just spray with isopropyl alcohol and let it dry. That is enough to hide the print lines and get that shiny finish it has.
Infill 15%
Nozzle size 0.4mm,
Layer Height 0.2mm,
Print speed 200 ms,
No Supports needed, but I would reccomend the usage of a raft.
Wall count 2

After printed and potprocessed, I opened a small hole in the base (or top) so that the light source would properly illuminate the inside of the piece.

I bought 2 different light sources on Aliexpress:
Hanging lamp: https://es.aliexpress.com/item/1005005094341270.html?spm=a2g0o.order_list.pcOrderListRecommend.4.683f194dwdUPEB&gps-id=pcOrderListRecommend&scm=1007.38956.373968.0&scm_id=1007.38956.373968.0&scm-url=1007.38956.373968.0&pvid=cf57ef18-4deb-4bba-9110-2e6426baa5ed&_t=gps-id:pcOrderListRecommend,scm-url:1007.38956.373968.0,pvid:cf57e