GEAR MESH ROTER

IF YOU LIKE MY WORK PLEASE RATE 💯 Your support means a lot 🙌🙏 Assembly Instructions Download all STL files from the model directory and print all parts. On the base plate and small gears, you will notice guide hole markings. Carefully drill them using a 1.5 mm drill bit (recommended) to slightly enlarge the holes. Prepare the rods: Cut 1.5 mm steel rods (approx. 1.6 cm length) You can use a large paper clip as material Insert & fix: Apply a small amount of glue Insert the rods into the base plate holes Let it set for ~2 minutes Assembly: Place the small gears onto the rods Install the main gear at the center