Geared Arduino Clock

***UPDATE Feb 5/17***
So I scaled up the frame and motor mount, but because of that the holes on the motor were too narrow, so I drill and bent them out, gears fit much better, but still need a little tweaking. https://www.youtube.com/watch?v=_exBGDI-vp0&feature=youtu.be


***UPDATE Feb 4/17***
Put together, but real tight, going to scale the frame up a little and see if that helps.
***********************

What I did was combine the gear sets into 1 model, so you don't have to glue them together, I also had to scale up the spacer a little as the hole was a bit smaller than the gears. I also made a space so not to use a metal one and I also made the nylon washers, I will then drill/file out the gear sets so the spacers will ride smoothly. I also included the 123d file if you would like to play,

just printing now, so hoping it works, will upload pics once it is up and running

as you can see from pics that the gears are printing on top of each other, that is why you need s