Thingiverse
Geared Fan Cover
door Dunn3DP
1
Downloads
2
Likes
0
Makes
Here is a cover and base for the geared fan by that1guyuknow. I liked the fan and thought it needed cover so here is one for it. It also has a modified gear cover to fill in the extra gap with the cover over the handle gear.
Change rotations and add support where needed, should be an easy print.
It is pretty large so you may have to print this at 90% scale and also print the geared fan at 90% for everything to fit. If you have a larger bed then 220mm X 220mm X 300mm you should be able to do this at 100% scale.
My brother did the design I'm just sharing the work, all credits go to him for this.
Change rotations and add support where needed, should be an easy print.
It is pretty large so you may have to print this at 90% scale and also print the geared fan at 90% for everything to fit. If you have a larger bed then 220mm X 220mm X 300mm you should be able to do this at 100% scale.
My brother did the design I'm just sharing the work, all credits go to him for this.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!