Thingiverse
Geared Propeller Adapter
door scottychop
57
Downloads
47
Likes
0
Makes
I decided to put together a small adapter that will allow you to run regular props on the Bayangtoys X5C-1. There are two versions of the adapter, one for 5mm hole props, and one for 6mm hole props. There is also an adapter that works OK that has a threaded screw up top, but I worried about shear on impact causing these to break off. Feel free to play around with these and let me know!
You will need to tap the M3 threads to match your preferred bolt or screw. I used an M3 x .5 tap and nylon screws, but you could use whatever you have. I even got a few to work just using the screw itself as a tap, but a real tap would be better at clearing the plastic offcuts.
You will need to tap the M3 threads to match your preferred bolt or screw. I used an M3 x .5 tap and nylon screws, but you could use whatever you have. I even got a few to work just using the screw itself as a tap, but a real tap would be better at clearing the plastic offcuts.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
