GEEETech i3 (All Version): Calibration Kit

Hi,
in the last two years I’ve help lot of people to fine tune their GEEETech i3 series printer, and lot of time the solution, solved the “normal issues”, was the same… better calibration!
Each single time I give to people ask my help always the same identical instruction in order to do a better calibration, so now I’ve decided to directly share stl I normally use during calibration and write down instruction!
In this kit you’ll find:

Regular 100x100, and 100x100x100, brackets useful to calculate the exact value of Marlin’s STEPS_PER_UNIT define for your printer
Standard 20x20x10x1 calibration parallelepiped useful to calculate right value for Slic3R Extrusion Multiplier
The Excel spreadsheet with the automation of all calculations for STEPS_PER_UNIT and Extrusion Multiplier Calibration
I’ve also try to write down each step of these fine tuning, with photos and screenshot that, I hope, can easily understand by anybody!


IF YOU “FALL IN LOVE” OF ONE OF MY DESIGNS AND TRICS,