Thingiverse

Geeetech I3 Pro Mosfet Mount

by faultedlogic

2 Downloads

2 Likes

0 Makes

This is a simple external MOSFET mount for the Geeetech I3 Pro acryllic printers.

It attaches on the back side of the printer with the nut from the 10mm threaded rod nearest the control board. Simply loosen the nut, slide the flat washer back 3mm, slide the mount on, then tighten the nut. The MOSFET attaches to the mount with the 4 pushpins included with this design.

I added a wire thruway that will attach to the other sides threaded rod for bringing the 12v wires over from the power supply to the MOSFET to tidy things up.

acrylic bed bracket geeetech Heated Bed I3 pro i3 Pro B i3 Pro C MOSFET mount acrylic bed bracket geeetech Heated Bed I3 pro i3 Pro B i3 Pro C MOSFET mount

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format