Geeetech Spool Drawer Tower

Drawers for the Geeetech filament rolls, including top tray and turn table foot.

Spool dimensions (see picture):

Diameter (green): 197 mm
Hight outer (green): 62 mm
Hight inner (red): 57 mm
Hole (red): 59 mm
Distance from inner tube to outer rim (red): 56 mm

Other companies may use the same type of spool (look for the "3D isometric cube" pattern on one side).

Note that some drawers are full height and others are half height. In the case of the later, the upper and lower drawers will be different.

Use the drill template as a guide for drilling the required four holes directly opposite on either side of the spool.

Fix each drawer through the hole in the spool with small screws so the screws move freely in the spool.

As for screws, both 2.5 x 13 and 3 x 15 will work.