geisha gold

by champolion

53 Downloads

41 Likes

18 Makes

Download Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x353.16mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Good as Gold Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructio