Geisha Hueforge

by Hadukis · Hueforge & Lithophane

72 Downloads

40 Likes

46 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 186.67x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5#646c74 PLA Copymaster 3D Grey Transmission Distance: 1.5#080a0d PLA BambuLab Basic Black Transmission Distance: 0.3#c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions:Start with Jade WhiteAt layer #7 (0.64mm) swap to GreyAt layer #13 (1.12mm) swap to BlackAt layer #17 (1.44mm) swap to Red for the rest.Boost Me