Thingiverse
Gekko Box
por AhmxdM
3
Descargas
5
Likes
0
Makes
A snappy supportless magnetic (or nonmagnetic) container inspired by Gekko from Valorant (Very easy assembly).
You can find 2 versions of the model, one with magnet slots (10x3mm) and a loose joint to add that snappy effect. The other has no slots for magnets and has a tighter joint to hold the cover well.
Use any adhesive to stick the “Initiator symbol” and the magnets (there are 4 of them).
No support is needed for any of the parts but you MUST rotate the parts 180 degrees on your slicer.
Printed at 20% infill and 0.2 layer height, however, I recommend lowering the layer height for better results.
I will be making more of these boxes for other agents, suggest which one should be next!
You can find 2 versions of the model, one with magnet slots (10x3mm) and a loose joint to add that snappy effect. The other has no slots for magnets and has a tighter joint to hold the cover well.
Use any adhesive to stick the “Initiator symbol” and the magnets (there are 4 of them).
No support is needed for any of the parts but you MUST rotate the parts 180 degrees on your slicer.
Printed at 20% infill and 0.2 layer height, however, I recommend lowering the layer height for better results.
I will be making more of these boxes for other agents, suggest which one should be next!
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
