Thingiverse

Gelatinous Cube

by ClayRade

915 Downloads

489 Likes

6 Makes

Go to Model

A Gelatinous Cube draws near! 28mm scaled, so it will take up the standard 2x2 inch grid spacing a Large creature would.

Both a standard version and a Dragon Quest slime variant are included, because why not?
Edit: There was a request for the Slime Faced cube without bones or bits (Gelatinous CubeDQNobits_fixed.stl)
Edit2: Request for a completely smooth cube with no bits (Gelatinous CubeSmoothNoBits.stl)
Edit3: Added HOLLOW versions of all four variants

Painting suggestion: after painting the cube and the bones/armaments, finish it with a healthy layer of a tinted acrylic gel or gloss medium for that wet goopy look!

[If you liked this model and want to show your thanks, you can buy me a coffee!](https://ko-fi.com/clayrade)

[And follow me on Instagram!](https://www.instagram.com/clay.rade/)

28mm cube dnd dnd miniature Dragon Quest dungeons and dragons Gelatinous cube miniature 28mm monster pathfinder pathfinder mini RPG slime slime cube

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed · significant post-processing

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Post-processing

Painting, Sanding

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

ClayRade also publishes on

2 additional models across 1 more platforms

MyMiniFactory

2 models

♥ 1,226

Frequently Asked Questions

Which 3D printer is suitable for Gelatinous Cube?

Any FDM printer should handle Gelatinous Cube just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Gelatinous Cube need supports when printing?

Yes, Gelatinous Cube will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Gelatinous Cube available in?

Gelatinous Cube is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Gelatinous Cube free to download?

Yes, Gelatinous Cube is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Gelatinous Cube

Similar Models

Add to Collection