gengar hueforge pokemon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 149.91x200mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #8d50bc PLA Copymaster 3D Perfect Purple Transmission Distance: 3.1 #ef426f PLA Kexcelled Fluorescent Red Transmission Distance: 4.5 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Perfect Purple At layer #16 (1.36mm) swap to Fluorescent Red At layer #23 (1.92mm) swap to White for the rest.