Genshin Impact Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Grey At layer #9 (0.8mm) swap to Black At layer #17 (1.44mm) swap to RedBorder Only Colors from here until the end. At layer #22 (1.84mm) swap to White for the rest. Add mouse ears if you struggling with plate adhesion or up temp to plate 70 or reduce fan speed.