Geometric Spherical Vase with Diamond Pattern (vase mode)

With its geometric diamond pattern, this vase showcases a striking, modern aesthetic. The triangular texture creates a captivating, almost jewel-like quality that transforms any spot. Whether displayed on a side table or nestled in a cabinet, this vase serves as a stunning focal point. Its distinctive texture and spherical form make it a conversation piece even without flowers, adding interest to your interior.Designed for vase mode printing, it can be 3D printed quickly using larger layer heights and widths, resulting in a durable object.SpecificationsDimensions: 8,8 x 20 cmPrint time: 2 - 4 hoursResizable: yes, in your slicer.3D Model type: SOLID body (not hollow inside, specifically designed for vase mode)Printing technique: FDM / FFF-onlyFile type: STLRecommended materials: PLA, PETGRecommended slicer: Prusaslicer, ****, Simplify3DPrint difficulty: easyRecommended nozzle diameter and print settingsFor sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill.Slicer setting: vase mode / spiralize outer contours ENABLEDNozzle diameter: 0.8mm, 1mm, or largerBottom layers: 8Perimeter speed range: 15 - 30 mm/sLayer height range: 0.1 mm - 0.6 mmExtrusion width / wall thickness range: 1mm, 1.2mm or 1.4mm+Watertight?: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion.License info: PERSONAL USE ONLY, unless you have a commercial license.Note: these are real photos of my test print that I made with a DSLR and a studio light (these are not renders / AI). Filament I used is SILK PLA.