Thingiverse
GEPRC Cinelog25 PropGuard Delete
by jhett6
0
Downloads
2
Likes
0
Makes
In Canada (and many countries around the world) you do not need to register a drone below 250g with Transport Canada. The prop guards are approx. 20g~ so this is great weight savings, and can allow you to carry a 4k camera under 250g.
The motor screws are quite long (for the prop guards / ducts), and if you remove the guards you will damage the motors using original screws, so these spacers are the perfect size to accommodate the screws and clear your wires. For my build, I flipped the drone over into a puller configuration, You can scale the part as needed to get the spacing you want.
Remixed from a nice frame model by VDNfpv using some quick cuts and mirroring in blender.
Printed it PETG 0% Infill
The motor screws are quite long (for the prop guards / ducts), and if you remove the guards you will damage the motors using original screws, so these spacers are the perfect size to accommodate the screws and clear your wires. For my build, I flipped the drone over into a puller configuration, You can scale the part as needed to get the spacing you want.
Remixed from a nice frame model by VDNfpv using some quick cuts and mirroring in blender.
Printed it PETG 0% Infill
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
