Thingiverse
Geprc Leopard Dji Hd Canopy
par Pezon
12
Téléchargements
12
Likes
1
Makes
This is a Dji Hd fpv canopy for Geprc Leopard fpv frames.
There is room for a two board high stack underneath the air unit.
Place for 900Mhz Crossfire or R9 T-antenna in front.
The fin is hollow for the long Camera cable to go up from the air unit and back down to the camera.
Front screws needs pressnuts/captive nuts, 25mm standoffs in the rear, can probably be replaced with usual nuts.
Fits LX4 LX5 LX6 LS4 LS5 LS6.
Tested with PLA and PETG.
There is room for a two board high stack underneath the air unit.
Place for 900Mhz Crossfire or R9 T-antenna in front.
The fin is hollow for the long Camera cable to go up from the air unit and back down to the camera.
Front screws needs pressnuts/captive nuts, 25mm standoffs in the rear, can probably be replaced with usual nuts.
Fits LX4 LX5 LX6 LS4 LS5 LS6.
Tested with PLA and PETG.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !