Ghost Rider Hueforge

Wanted to share a hueforge I made using one of my favorite comic book artist Clayton Crain's Ghost Rider cover from The Road to Damnation series. Please enjoy. Excited to see others color swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x289.36mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Plus Overture Black Transmission Distance: 1 PLA Polyterra Army Red Transmission Distance: 5 PLA Matte Overture Matte Orange Transmission Distance: 4.5 PLA Elegoo White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #15 (1.28mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest. I personally work with a Bambu Labs A1 mini so scaling it down to my bed plate makes the color changes happen on different layers. Swap Instructions for A1 mini: