Ghostface - Scream -Hueforge

Ghostface - Scream - HueForge Can be rescaled just remember not to change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.8mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #18 (1.52mm) swap to Orange At layer #25 (2.08mm) swap to White for the rest Thanks!!