Ghostface Snowboarding

Son loves Ghostface so I did a hueforge print for his room. Have two different sizes of the it. If you like, please leave a like and comment. Thank you, happy printing. As requested,filament layer changes are posted in description for both. Large (6.3 hr)Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x197.78mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23998mmFilaments Used: (* = Owned) PLA BambuLab Matte Charcoal Transmission Distance: 1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to Blue Gray At layer #15 (1.28mm) swap to Ash Gray At layer #21 (1.76mm) swap to Ivory White for the rest. Smaller (2 hr) Print at 100% infil