Girl Bookmarks

In the print profile is a negative part “hole” added. (not in .stl file)If you want the bookmark without a hole so remove only it before final print. I have given two version size models in one (same) profile, the first is size 50x150mm and the second is 65x200mm. The color change settings are identical. You can remove the one that you don't want to print (the larger one in the case of A1 Mini). Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.8mm and the Actual Depth is 1.8mm. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.Filaments Used