Girl face I.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x200mm in size. You may print at higher layer heights below the Min Depth of 0.64mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to Ash Gray At layer #17 (1.44mm) swap to Jade White for the rest.