Thingiverse

GIRO.ETS - BLTouch Mount

di Keromida

5 Download

2 Likes

0 Makes

####GIRO.ETS - BLTouch Mount####
####Supporting Information####
If you like my work and find it usefull then I would be very happy if you could download the files via Printables as linked below and follow me on Printables.

#####Printables: [Click me!][]#####

![Thank_you](https://abload.de/img/thankyou2png8vk1d.png)
####General####
This bracket was designed to be mounted on top of the hotend enclosure. The BLTouch should be mounted facing the right side and the cables should be pulled through the longhole in the bracket.

You will need additional screws, nuts and washers for the mounting of bracket. The needed parts are mentioned below.

**Additional screws, nuts and washers per bracket**
2x M3x5 or 2x M3x10
- - -
####Printing####
I would recommend to use 2 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% infill.

- - -
####Firmware adjustments####
To set the accur

BLTouch BLTouch Bracket bltouch mount bracket Eryone Eryone Thinker S ets giro giro3d GIROETS GIROremix mount thinker thinker S BLTouch BLTouch Bracket bltouch mount bracket Eryone Eryone Thinker S ets giro giro3d GIROETS GIROremix mount thinker thinker S

Fonte

Thingiverse

Cosa serve per stampare: Intermedio Bassa affidabilità

Pezzo unico Viteria richiesta

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 1/3

Stampante

FDM / FFF

Formato file