Thingiverse
GIRO.HUE - Motion Sensor Wall Mount
by Keromida
31
Downloads
26
Likes
0
Makes
####GIRO.HUE - Motion Sensor Wall Mount####
####Supporting Information####
If you like my work and find it usefull then I would be very happy if you could download the files via Printables as linked below and follow me on Printables.
#####Printables: [Click me!][]#####
####General####
This bracket was designed to be mounted with the original magnet and screw provided by Philips. The wall mount can be rotated by the middle section and the arm can be adjusted lineary due to a single axis rotation ensured by the additional M3 screw.
**Additional screws, nuts and washers per bracket**
1x M3x16 Socket Screw
1x M3 Nut
1x Wall Screw (Anchor + screw or regular wood screw, depends on wall or use double sided adhesive)
- - -
####Printing####
I would recommend to use 3 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% I
####Supporting Information####
If you like my work and find it usefull then I would be very happy if you could download the files via Printables as linked below and follow me on Printables.
#####Printables: [Click me!][]#####
####General####
This bracket was designed to be mounted with the original magnet and screw provided by Philips. The wall mount can be rotated by the middle section and the arm can be adjusted lineary due to a single axis rotation ensured by the additional M3 screw.
**Additional screws, nuts and washers per bracket**
1x M3x16 Socket Screw
1x M3 Nut
1x Wall Screw (Anchor + screw or regular wood screw, depends on wall or use double sided adhesive)
- - -
####Printing####
I would recommend to use 3 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% I
Keromida also publishes on
24 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!