Thingiverse
Glass Etching 3D Printer
von deltamodulator
25
Downloads
20
Likes
0
Makes
Dubbed jokingly the "LesterBot", this printer is little more than an XY table with a swiveled glass cutter moving over a glass surface, etching in a pattern that grows deeper with time. Topological features are possible to accomplish, making it a limited form of a 3D printer.
Other materials, cutters, or deposition heads may be fitted if they are light enough. The motors are plastic and also act as the bearings for the rollers, which accept bands of the correct length.
The control is frequency to position mapped audio on the left=x and right=y channels out of the stereo jack of any mp3 player, phone, or computer. GCode is converted to musical frequencies by a custom written program.
Power is provided through USB cable from computer, phone, or battery pack. Audio frequency to servo position conversion is done by three ATtiny85 Arduino processors which only cost $2.50 each.
With this simplified printer one can make many things, yet the parts are either printable or scroun
Other materials, cutters, or deposition heads may be fitted if they are light enough. The motors are plastic and also act as the bearings for the rollers, which accept bands of the correct length.
The control is frequency to position mapped audio on the left=x and right=y channels out of the stereo jack of any mp3 player, phone, or computer. GCode is converted to musical frequencies by a custom written program.
Power is provided through USB cable from computer, phone, or battery pack. Audio frequency to servo position conversion is done by three ATtiny85 Arduino processors which only cost $2.50 each.
With this simplified printer one can make many things, yet the parts are either printable or scroun
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
