Glider 3.0

Simple glider assembly. Printing is very easy and no special settings are required. Clean the parts with supports carefully and carefully, they are fragile. The assembly is really simple, insert the wings into the holder. Fold the fuselage and then insert the wing assembly - the higher part will come towards the nose. Then insert the cabin and insert the rudder at the end. For better strength of all parts, I recommend using glue, but only after testing that the wings are in the right place The first layer is set to a height of 0.12mm, the next layers to 0.08mm, this setting is important to use when printing the wings, the remaining parts can be printed at a layer height of 0.2mm. All parts are set to 100% infill Boost MeThank you :)Membership