Gloomhaven - Water - 2 Hex

This is a HueForge remix of https://www.thingiverse.com/thing:2838980 Project:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 66.1x64.863mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 2.3mmFilaments Used:PLA BambuLab Matte Marine Blue Transmission Distance: 0.5PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with Marine BlueAt layer #6 (0.56mm) swap to Ice BlueAt layer #11 (0.96mm) swap to Jade White for the rest.