Glow Skull Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Glow Skull Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 4.48mm and the Actual Thickness is 2.32mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #c4e1cc PLA Flashforge Glow Blue HS Transmission Distance: 5.3 #ffffc7 PLA BambuLab Glow Glow Green Transmission Distance: 5.5This print uses 3 unique filaments ***attached .3mf file prints the first 4 layers at 0.24mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #3 (1.28mm) swap to Glow Blue HS At layer #10 (1.84mm) swap to Glow Green for the