Glowing Freddy

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.4mm and the Actual Depth is 2.3mm Filaments Used: PLA+ Numakers Pitch Black Transmission Distance: 1.6 Elegoo Glow Green This print uses 2 unique filaments Swap Instructions: Start with Pitch Black At layer #11 (0.96mm) swap to Any glow filament you would like for the rest.