Thingiverse
Glowing Light Bulb
von Mike-vom-Mars
268
Downloads
247
Likes
3
Makes
Glowing (self-luminous), decorative light bulb.
To be printed with self-luminous (glowing) PLA. Two versions: Self-standing or hanging light bulb.
Bulb:
- Print with self-luminous (glowing) PLA.
- Print it upright (as provided in the .stl file)
- Wall thickness: 0.8mm or more
- No supports
- No infill
- Use raft for best adhesion
Socket:
- Print with silver PLA (or use chrome effect spray paint afterwards)
- Print the normal socket for a self-standing bulb
- Or print the socket with ring for a hanging bulb
- Recommended infill: ~5%
Post Print:
- Use any glue to stick the socket and the bulb together.
- Use chrome effect or silver spray for the socket, which gives a nice metallic look.
To be printed with self-luminous (glowing) PLA. Two versions: Self-standing or hanging light bulb.
Bulb:
- Print with self-luminous (glowing) PLA.
- Print it upright (as provided in the .stl file)
- Wall thickness: 0.8mm or more
- No supports
- No infill
- Use raft for best adhesion
Socket:
- Print with silver PLA (or use chrome effect spray paint afterwards)
- Print the normal socket for a self-standing bulb
- Or print the socket with ring for a hanging bulb
- Recommended infill: ~5%
Post Print:
- Use any glue to stick the socket and the bulb together.
- Use chrome effect or silver spray for the socket, which gives a nice metallic look.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
