Godox TT350 Camera Flash Adapters

Camera flash adapters for a Godox TT350 flash and a Profoto Dome Diffuser. These may still be useful without using a Profoto Dome Diffuser, which press-fits into the end of each adapter, as you can instead place diffusion gel over the end instead.

Each flash adapter has a twist-lock fit with detent inside the female adapter that is press-fit onto the flash head.

I recommend printing the female flange mount upside-down (circular opening on print bed) so that the detent in the twist-lock is printed without the need of supports. I would also recommend using a 0.12 to 0.16 layer height since the detent only extend a fraction of a millimetre into the track and for a smoother detent feel the smaller layer heights will help.

The male adapter for the Profoto Dome can be printed with bigger layer heights, I used either 0.16 or 0.20. You may need to file a small amount around the four nubs that are used for the locking mechanism to ensure a smooth fit but they often work just fine witho