Gogo from Kill Bill - Hueforge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm The Model is 123.14x161mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyTerra Cotton White Transmission Distance: 1.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.84mm) swap to Lava Red At layer #10 (1.32mm) swap to Savannah Yellow At layer #14 (1.8mm) swap to Cotton White for the rest.