gohan hueforge

Project: goah.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 259.7x461.54mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #8d50bc PLA Copymaster 3D Perfect Purple Transmission Distance: 3.1 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 5 unique filaments Swap Instructions: Start with BambuLab Basic Black At layer #8 (0.8mm) swap to Copymaster 3D Perfect Purple At layer #13 (1.2mm) swap to BambuLab Basic Black At layer #14 (1.28mm) swap to BambuLab Basic Hot Pink At layer #18 (1.6mm) swap to BambuLab Basic Beige At layer #21 (1.84mm) swap to BambuLab Matte Ivory White for the rest.