MakerWorld
Other Art Models
Go to Model
Gojo HueForge
13
Downloads
6
Likes
1
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130.43x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Dark Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 3.5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Gray At layer #9 (0.8mm) swap to Jade White At layer #20 (1.68mm) swap to Red for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
