Goku Chillin

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Dark Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Gray At layer #12 (1.04mm) swap to Brown At layer #22 (1.84mm) swap to Jade White for the rest.